ASROCK Z390 Phantom Gaming X User Manual page 84

Z390 Phantom Gaming X
CPU Slew Rate
Configure the CPU Slew Rate. Adjust the BCLK signal by defining the maximum
change rate of the output voltage. Higher value will result in a shorter signal rising
time.
CPU PLL ORT
Configure the CPU PLL ORT. Overshoot Reduction Technology improves the
BCLK signal to decrease overshoot/undershoot.
Divider
Configure the BCLK divider.
Boot Performance Mode
Select the performance state that the BIOS will set before OS handoff.
FCLK Frequency
Configure the FCLK Frequency.
AVX Ratio Offset
AVX Ratio Offset specifies a negative offset from the CPU Ratio for AVX workloads.
AVX is a more stressful workload that lower the AVX ratio to ensure maximum
possible ratio for SSE workloads.
BCLK Aware Adaptive Voltage
BCLK Aware Adaptive Voltage enable/disable. When enabled, pcode will be aware
of the BCLK frequency when calculating the CPU V/F curves. This is ideal for
BCLK OC to avoid high voltage overrides.
Ring to Core Ratio Offset
Disable Ring to Core Ratio Offset so the ring and core can run at the same fre-
quency.
Intel SpeedStep Technology
Intel SpeedStep technology allows processors to switch between multiple frequen-
cies and voltage points for better power saving and heat dissipation.
Intel Turbo Boost Technology
Intel Turbo Boost Technology enables the processor to run above its base operating
frequency when the operating system requests the highest performance state.
77