ASROCK Z390 Phantom Gaming X User Manual page 35

SPI TPM Header
(13-pin SPI_TPM_J1)
(see p.9, No. 19)
Thunderbolt AIC
Connector
(5-pin TB1)
(see p.9, No. 28)
RGB LED Headers
(4-pin RGB_HEADER1)
(see p.9, No. 31)
(4-pin RGB_HEADER2)
(see p.9, No. 30)
Addressable LED Header
(3-pin ADDR_LED1)
(see p.9, No. 32)
28
SPI_DQ3
+3.3V
Dummy
CLK
SPI_MOSI
RST#
TPM_PIRQ
1
SPI_TPM_CS#
GND
RSMRST#
SPI_MISO
SPI_CS0
SPI_DQ2
1
12V G R B
1
GND
DO_ADDR
VOUT
This connector supports SPI
Trusted Platform Module (TPM)
system, which can securely store
keys, digital certificates, pass-
words, and data. A TPM system
also helps enhance network
security, protects digital
identities, and ensures platform
integrity.
Please connect a Thunderbolt™
add-in card (AIC) to the
Thunderbolt AIC connector via
the GPIO cable.
*Please install the Thunderbolt™
AIC card to PCIE5 (default
slot).
RGB header is used to connect
RGB LED extension cable which
allows users to choose from vari-
ous LED lighting effects.
Caution: Never install the RGB
LED cable in the wrong orienta-
tion; otherwise, the cable may
be damaged.
*Please refer to page 67 for
further instructions on this
header.
This header is used to connect
Addressable LED extension cable
which allows users to choose
from various LED lighting
effects.
Caution: Never install the
Addressable LED cable in the
wrong orientation; otherwise,
the cable may be damaged.
*Please refer to page 68 for
further instructions on this
header.