When installing: Take the two sides of the sensor board, and then push it into the hook from the right
side to the left side
1
. Then take the two sides of the sensor board and press it into the hook
that the connector is attached firmly.
Note: Do not press the surface of the sensor board.
3030 Hinges
For access, remove these FRUs in order:
•
"1010 Bottom cover" on page 60
•
"1020 Battery" on page 61
•
"1030 M.2 solid-state drive" on page 63
•
"1040 Wireless LAN card" on page 64
•
"1050 Memory module" on page 64
•
"1060 Coin-cell battery" on page 65
•
"1070 Keyboard" on page 65
• "1080 Keyboard bezel assembly and media-card-reader board" on page 67
• "1090 System board assembly, dc-in connector, and thermal fan" on page 70
•
"1100 LCD unit" on page 74
• "3010 LCD panel assembly, LCD cable, and LCD panel brackets" on page 81 "3020 Camera/microphone
board and proximity sensor board" on page 84
86
11e 4th Gen and Yoga 11e 4th Gen Hardware Maintenance Manual
2
. Ensure