Table of Contents
Advertisement
2. Insert the CD into the external optical drive.
3. Restart the computer.
4. When the ThinkPad logo is displayed, repeatedly press and release the F12 key. When the Boot
Menu window opens, release the F12 key.
5. Use the arrow keys to select ATAPI CDx (x: 0, 1, ...) and then press Enter. The diagnostic program
will be launched automatically.
6. Follow the instructions on the screen to use the diagnostic program.
Power system checkout
To verify if a battery and an ac power adapter are functional, do the following:
1. Turn off the computer.
2. Connect the ac power adapter.
3. Turn on the computer. If the computer can be turned on, it means that either the battery or the ac
power adapter is functional.
4. Turn off the computer.
5. Disconnect the ac power adapter and turn on the computer. If the computer can be turned on, it
means that the battery is functional.
If you suspect a power problem, see the appropriate one of the following power supply checkouts:
•
"Checking the ac power adapter" on page 26
•
"Checking the battery and operational charging" on page 27
•
"Checking the coin-cell battery" on page 27
Checking the ac power adapter
You are here because the computer fails only when the ac power adapter is used.
• If the system-status indicator does not blink three times when an ac power source is connected, check
the power cord of the ac power adapter for correct continuity and installation.
• If the computer does not charge during operation, go to "Checking the battery and operational charging"
on page 27.
To check the ac power adapter, do the following:
1. Unplug the ac power adapter cable from the computer.
2. Measure the output voltage at the plug of the ac power adapter cable. See the following illustration:
3
2
1
Note: Output voltage of pin 2 of the ac power adapter might differ from the one you are servicing.
3. If the voltage is not correct, replace the ac power adapter.
4. If the voltage is acceptable, replace the system board.
Note: Noise from the ac power adapter does not always indicate a defect.
26
11e 4th Gen and Yoga 11e 4th Gen Hardware Maintenance Manual
(20V)
Pin
Voltage (V dc)
1
+20
2
0
3
Ground
Advertisement
Table of Contents
