Holmes 32510091 Instruction Manual

C L E A N I N G / M A I N T E N A N C E
USER SERVICING INSTRUCTIONS
FAN CLEANING
• Always unplug the fan before cleaning.
Follow these instructions to safely and correctly care for
• Do not allow water to drip on or into fan housing.
this fan.
• Use only a soft cloth moistened with a mild soap
REPLACEABLE FUSE
solution.
If the (5 Amp, 125 Volt) replaceable fuse blows, please • Do not use harsh chemicals such as gasoline, thinner
or benzene as a cleaner.
contact customer service for information on how to order
a new fuse. Follow the below instructions to replace the
FAN BLADE CLEANING
fuse on the plug.
1. Always unplug the fan before cleaning
1. Unplug the fan. Grasp plug and remove from the
2. Remove the front grill by taking off the grill screw
receptacle or other outlet device. Do not unplug by
and nut (W) located on the bottom of the grill.
pulling on cord.
3. Clean the fan blade, front and rear grills with a soft
2. Locate the fuse holder on the power cord. Use
cloth moistened with a mild soap solution.
screwdriver to remove the fuse cover and take out the
4. Securely fasten the front grill to the rear grill by
O-ring (see Figure 4).
replacing the grill screw and nut (W). Tighten with
Note: Ensure that fuse
screw driver. (Use Philips head screw driver).
cover is completely open
before attempting to
FAN HEAD, BASE AND POLE CLEANING
remove fuse.
Unplug the fan, then using a soft, moist cloth (with or
3. Remove fuse carefully by
without a mild soap solution), carefully clean the fan base,
using a small screwdriver
pole and head. Use CAUTION around the housing area. Do
to pry the fuse out of
not allow the motor or other electrical components to be
the compartment by the
exposed to water.
metal ends of the fuse (see
Figure 4).
FAN STORAGE
4. Place Fuse Box on a solid
flat surface. Insert new This fan can be stored either partially disassembled or
5 Amp, 125 Volt fuse assembled.
into fuse compartment and use a small screwdriver • Store the fan in a clean, dry location between
to secure the metal ends of the fuse into the seasons or when not in use for an extended period of
compartment. time.
Caution: Risk of fire. Replace fuse only with 5 Amp, • Keep the fan protected from dirt and dust during
125 Volt fuse. storage.
5. Replace the O-ring, close the fuse cover in place and
secure with the 2 screws (see Figure 4). If fuse cover
For inquiries regarding recycling and proper disposal
is difficult to close, make sure fuse is secured in place
of this product, please contact your local waste
completely by pressing down on metal ends of the
management facility.
fuse.
CAUTION: Risk of Fire. Do not remove or replace the
Fuse Box. It contains a safety device (fuse). Discard
product if the fuse box is damaged.
WA R R A N T Y I N F O R M AT I O N
3 YEAR LIMITED WARRANTY
This device has a 3 Year limited warranty for the original purchaser from the date of purchase against workmanship and
defects in material. If under normal use, your product fails to operate, a replacement or refund will be provided to you
with proof of purchase. Star Elite Inc. may deny claims of damage caused by misuse or modifications of this product.
How to Obtain Warranty Service
If you have any problems, please do not contact the store.
Contact our customer service at:
www.getholmesfans.com
info@getholmesfans.com
1-866-769-3166 (8:30 am - 5:00 pm EST) Monday - Friday
Our customer service will be happy to assist you.
© 2023 Sunbeam Products, Inc. All rights reserved.
HOLMES is a registered trademark of Sunbeam Products, Inc. used under license.
®
Distributed by Star Elite Inc., Montreal, Canada H3B 3X9
SEH022-111523
Printed In China
Instruction Manual
16 Inch
Outdoor Misting Fan
PLEASE READ AND SAVE THESE IMPORTANT INSTRUCTIONS
Item: 12096 / 12971
Model: 32510091