Table of Contents
Advertisement
LIGHTS
Flashing - On
Flashing
Flashing - On
Flashing
3. MENÙ SETTINGS
Enter the setting
menu
Press both buttons (B5)
and (B7) for 3 seconds to
enter setting menu
Select the setting
Turn the knob (B8)
to select the position
corresponding to the
function to set
Press the temperature button:
Press the temperature button again to change the setting:
Statistics
For Servicing Purposes
Only (see par. "10.1
How to read the
statistics")
EXPLANATION OF LIGHTS
Descaling is selected
Descaling proceeds. The machine deliv-
ers descaling solution
The first phase of the descaling cycle
is complete. You now need to proceed
with rinsing.
The machine proceeds with the rinsing
phase to complete the descaling cycle.
+
the light corresponding to the corrent setting flashes.
Extra grinding
Pre-infusion
delay
adjustment
➡ No
➡ 1 sec
➡ 2 sec
OPERATION
Press OK (B6) to run descaling cycle or turn the
selection knot to the drink desired
Proceed by completing the descaling cycle
(see "9. Descaling")
Press OK to start rinsing.
Proceed by completing the descaling cycle
(see "12. Descaling")
Reset to default
values
Keep pressed steam but-
ton (B9) for 3 seconds
Auto off
➡ 9 minutes
range
st
➡ 1
➡ 1,5 hours
➡ 2
range
nd
➡ 3 hours
6
Water hardness
➡ soft
➡ medium
➡ hard
→
...
Advertisement
Table of Contents
