Using The Viewpanel; Setting The Timing Mode - ViewSonic VA500 User Manual

Using the ViewPanel

Setting the Timing Mode

Setting the timing mode is important for maximizing the quality of the screen
image and minimizing eye strain. The timing mode consists of the resolution
(example 1024 x 768) and refresh rate (or vertical frequency-example 60 Hz).
After setting the timing mode, use the OnView
the screen image.
The recommended timing mode for this ViewPanel is:
To set the Timing Mode:
Set the resolution: Right-click on the Windows
1
Settings > Desktop Area or Screen Area for Windows 98 and newer > set
the resolution.
Set the refresh rate: See your graphic card's user guide for instructions.
2
Do not set the graphics card in your computer to exceed the
WARNING:
maximum refresh rate of 75Hz; doing so may result in permanent damage to
your ViewPanel.
controls (pages 8 - 10) to adjust
®
®
VESA 1024 x 768 @ 60 Hz
desktop > Properties >
®
ViewSonic VA550 5
E
N
G
L
I
S
H