Wall Mounting (Optional) - ViewSonic VA2448m User Manual

Wall Mounting (Optional)

To obtain a wall-mounting kit or height adjustment base, contact ViewSonic
dealer. Refer to the instructions that come with the base mounting kit. To convert your LCD
display from a desk-mounted to a wall-mounted display, do the following:
Step 1. Verify that the power button is turned Off, then disconnect the power cord.
Step 2. Lay the LCD display face down on a towel or blanket.
Step 3. Remove the base.
Step 4. Remove the two screws attaching the plastic cover.
Step 5. Remove the plastic cover from the back of the stand.
Step 6. Remove the two screws attaching the stand.
Step 7. Attach the mounting bracket from the VESA compatible wall mounting kit (100 mm
x 100 mm distance), using screws of correct length.
Step 8. Attach the LCD display to the wall, following the instructions in the wall-mounting
kit.
Step 3. Remove the base
ViewSonic VA2448-LED/VA2448m-LED
For use only with UL Listed Wall Mount Bracket
Step 7. Four VESA screw holes
Step 4. Remove the two screws
attaching the plastic cover.
or your local
®
Step 6. Remove
the two screws
attaching the
stand.
Plastic cover
7