Polaris General XP 1000 2024 Owner's Manual page 47

INDICATOR LAMPS
LAMP INDICATES
Vehicle Speed
Over
Temperature
Electric Power
Steering (EPS)
Warning (if
equipped)
Neutral
High Beam
Helmet/Seat Belt
Check Engine
Check Battery
Low Fuel
Speed Key
(optional
accessory)
FEATURES AND CONTROLS
CONDITION
When standard mode is selected, speed displays in miles per
hour.
When metric mode is selected, speed displays in kilometers
per hour.
This lamp illuminates to indicate an overheated engine. If the
indicator flashes, the overheating condition remains, and the
system will automatically reduce engine power.
This indicator illuminates briefly when the key is turned to the
ON position. If the light remains on, the EPS system is
inoperative. See your POLARIS dealer, or other qualified
person, as soon as possible for repair. Continued operation
could result in permanent damage to the EPS unit and
increased steering effort.
This lamp illuminates when the transmission is in neutral and
the ignition key is in the ON position.
This lamp illuminates when the headlamp switch is set to high
beam.
This lamp is a reminder to the operator to ensure all riders are
wearing helmets and seat belts before operating. The driver's
seat belt is equipped with a seat belt interlock. Vehicle speed
will be limited to 15 MPH (24 km/h) if the seat belt is not
secured.
This indicator appears if an Electronic Fuel Injection (EFI)
related fault occurs. Do not operate the vehicle if this warning
appears. Serious engine damage could result. Your
authorized dealer or qualified person can assist.
This warning usually indicates that the vehicle is operating at
an RPM too low to keep the battery charged. It may also
occur when the engine is at idle and high electrical load
(lights, cooling fan, accessories) is applied. Drive at a higher
RPM or recharge the battery to clear the warning.
This lamp illuminates when fuel level in the fuel tank is low.
Information about the speed key is provided in the accessory
kit.
45