Advertisement
Cautions
• When controlling the iris externally, set the auto iris ON/OFF switch
<D to "OFF". Iris control using this connector will not work if the auto
iris is ON.
• If you control the lens using external control device, the shortest
subject distance is fixed at 800 mm regardless of the zoom position.
© VIDEO OUT connector (BNC)
© Ground terminal
© AC 24 V input terminals
© 12V/6V switch
When using the lens control connector © to control the focus, zoom,
and iris from an external source, set this switch to match the input
voltage (±12 V or ± 6 V).
© NORM/REV switch
Use this switch whether the external input voltage is + or
to change
the direction of the focus, zoom and iris movement. Use the following
table for reference.
—__Function
Zoom
Focus
Iris
\Voltage
Switch \
position
\
+
—
+
—
+
—
NORM
Wide
Tele
Far
Near
Close
Open
REV
Tele
Wide
Near
Far
Open
Close
Advertisement
