Sony Hyper HAD SSC-MX34 Operating Instructions Manual page 2

Black and white video camera

-Kv'K- i '.'V v'.S

Cautions for installing the camera

If installing the camera on the ceiling, be sure it is secure. If not

securely installed, the camera may fall and injury may occur.

If the camera is installed on the ceiling using equipment such as a

bracket, housing and motored swivel base (pan/tilt), do the following:

• Use tripod screws and securely tighten them with a driver. Order the

tripod screws (Sony Part No. 3-174-693-01) from your nearest Sony

dealer.

• Install the tripod adapter on a flat surface.

Connections

Connect the camera to a power outlet, only after all connections have

been completed.

Using an internal synchronization

(D Set the SYNC switch to INT (internal synchronization).

(D 75-ohm coaxial cable

(D Connect with VIDEO IN connector on a video monitor, etc.

lock) and make connections as above.

When zoom, focus and the iris are controlled externally