Tape Playback - Pioneer SA-9900 Operating Instructions Manual

EMPLOYING TAPE DECK
'TAPE PLAYBACK
1. Set the TAPE MONITOR switch to 1 if the
tape deck is connected to the TAPE 1 jacks,
and to 2 if it is connected to the TAPE 2 jacks
2. Play tape on tape deck.
3. Adjust VOLUME, BASS & TREBLE controls
for desired volume and tone.
ores:
1 Be mre 10 set the TAPE MONITOR switch 10 SOUROP when
or paying cape
'TAPE RECORDING
1. Se; FUNCTION switch to the source to be
recorded (PHONO, TUNER, etc.)
2, Operate program source.
8. Adjust recording levels with the controls of the
tape deck and proceed with recording,
NoTE
'Ser DUPLICATE switch t0 ORF dung recording,
Monitoring Recording Conditions
If the tape deck is a S-head type recording condi-
tions can be monitored through the speakers by
setting the TAPE MONITOR switch to 1 (or 2)
Both recording and playback connections must be
performed in this case.
TAPE DUPLICATION & EDITING
By employing 2 tape decks, the desired material
only from a previously recorded tape can be edited
'onto a second tape. A personal tape library can be
compiled in this manner,
1, Connect 2 tape decks as shown Fig.12.
2, Set the TAPE DUPLICATE switeh to ON.
'© Duplication is performed while monitoring the
recording. Set the TAPE MONITOR switch to 1
(or 2) according to the deck being used for
recording 1 (or 2),
PIONEER
TAPE DECK 1 TAPE DECK?
eurcicare |
ita
'Tape recording: The input sigral selected by the FUNCTION
nite fe slays present ot fixed level at the TAPE 1 8&2 REC
jacks, Monitaring can be performed at this time Dy setting the
TAPE MONITOR swvech 10-1 oF 2, aacording tthe TAPE jacks
bing us for recordin. Fy. 11
a catete |
hoe
Fig. 12