Table of Contents
Advertisement
2. Connection to the network
[About IP address]
The Network address portion of the IP address setting on your computer must
be the same as the setting on the projector. Also, the entire IP address on the
including the projector.
The projector's settings are as follows.
IP address: 192.168.1.254
Subnet mask: 255.255.255.0
Therefore, specify the computer's IP address as follows.
Subnet mask: 255.255.255.0
For example
In this case, since the IP address of the projector is "192.168.1.254", specify a
setting between 1 to 253 for the computer.
NOTE
gateway must be set. Consult to the network administrator in detail.
19
Advertisement
Table of Contents
