Table of Contents
Advertisement
Phenomenon: The time settings are not correct.
Item to be checked
Is the projector connected to the
network correctly when getting
Is the time difference set correctly
Phenomenon:
Item to be checked
Are the serial settings set
Solutions
Set the battery.
The battery is considered to be exhausted if
the time is off soon after setting date and time.
In that case, replace the battery.
Check the settings of Date/Time Settings menu
of the Projector Web Control or DATE AND
TIME menu of the projector.
Connect to the network.
Consult with your network administrator
the correct time is not displayed if the time
difference is not set.
Set the time difference.
Solutions
COMMUNICATION - COMMUNICATION TYPE
menu.
COMMUNICATION TYPE menu.
Check the serial settings of the projector and
9. Troubleshooting
111
Advertisement
Table of Contents
