To Adjust Horizontal Airflow Direction; To Use 3D Airflow Direction; Comfort Airflow Operation; To Start/Stop Comfort Airflow Operation - Daikin FTXP35N5V1B9 User Reference Manual

5 | Operation

5.5.2 To adjust horizontal airflow direction

5.5.3 To use 3D airflow direction

5.6 Comfort airflow operation

5.6.1 To start/stop Comfort airflow operation

User reference guide
20
1 Press .
Result: appears on the LCD. The louvers (vertical blades) will begin to
swing.
2 To use fixed position, press
Result: disappears from the LCD. The louvers will stop moving.
INFORMATION
When the unit is installed in a corner of a room, the direction of the louvers should
be facing away from the wall. Efficiency will drop if a wall blocks the air.
1 Press and
Result: and
louvers (vertical blades) will begin to swing.
2 To use fixed position, press
the desired position.
Result: and
stop moving.
This operation can be used in heating or cooling operation mode. It will provide a
comfortable wind that will NOT come in direct contact with people. The system
automatically sets the fixed airflow position upward in Cooling and downward in
Heating operation mode.
Cooling operation mode
INFORMATION
Powerful and Comfort airflow operation CANNOT be used at the same time. The last
selected function takes priority. If the vertical automatic swing is selected, Comfort
airflow operation will be cancelled.
1 Press to start.
Result: The flap position will change,
airflow rate is set to automatic.
Mode
Cooling/Drying
Heating
when the louvers reach the desired position.
.
appear on the LCD. The flaps (horizontal blades) and
and
disappear from the LCD. The flaps and the louvers will
is displayed on the LCD, and the
Position of flap...
Up
Down
when the flaps and louvers reach
Heating operation mode
FTXP20~35N5V1B9 + ATXP20~35N5V1B9
Daikin room air conditioner
4D520466-17M – 2023.08