Table of Contents
Advertisement
Table 13. Power management (continued)
Option
Block Sleep
Intel Ready Mode
Table 14. POST behavior
Option
Numlock LED
MEBx Hotkey
Keyboard Errors
Fast Boot
Table 15. Virtualization support
Option
Virtualization
VT for Direct I/O
Trusted Execution
Table 16. Maintenance
Option
Service Tag
Asset Tag
SERR Messages
42
System Setup
Description
● Disabled - Does not allows the system to power on by special LAN signals when it
receives a wake-up signal from the LAN or wireless LAN.
● LAN or WLAN - Allows the system to be powered on by special LAN or wireless LAN
signals.
● LAN Only - Allows the system to be powered on by special LAN signals.
● LAN with PXE Boot - A wakeup packet sent to the system in either the S4 or S5 state,
that will cause the system to wake-up and immediately boot to PXE.
● WLAN Only - Allows the system to be powered on by special WLAN signals.
This option is Disabled by default.
Allows you to block entering to sleep (S3 state) in OS environment. This option is disabled by
default.
Allows you to enable the capability of Intel Ready Mode Technology. This option is disabled
by default.
Description
Allows you to enable or disable the Numlock feature when your computer starts. This option
is enabled by default.
Allows you to specify whether the MEBx Hotkey function should be enabled when the
system boots. This option is enabled by default.
Allows you to enable or disable the keyboard error reporting when the computer starts. This
option is enabled by default.
This option can speed up the boot process by bypassing some compatibility steps:
● Minimal — The system boots quickly, unless the BIOS has been updated, memory
changed, or the previous POST did not complete.
● Thorough — The system does not skip any steps in the boot process.
● Auto — This allows the operating system to control this setting (this works only when
the operating system supports Simple Boot Flag).
This option is set to Thorough by default.
Description
This option specifies whether a Virtual Machine Monitor (VMM) can utilize the
additional hardware capabilities provided by Intel® Virtualization Technology. Enable Intel
Virtualization Technology - This option is disabled by default.
Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional
hardware capabilities provided by Intel® Virtualization technology for direct I/O. Enable
Intel Virtualization Technology for Direct I/O - This option is disabled by default.
This option specifies whether a Measured Virtual Machine Monitor (MVMM) can utilize the
additional hardware capabilities provided by the Intel Trusted Execution Technology. This
option is disabled by default.
Description
Displays the Service Tag of your computer.
Allows you to create a system asset tag if an asset tag is not already set. This option is not
set by default.
Controls the SERR message mechanism. This option is not set by default. Some graphics
cards require that the SERR message mechanism be disabled.
Advertisement
Table of Contents
