Quasar MQS1063EV Operating Instructions Manual page 13

| Timer Setting
bs
This feature allows you to program a Stand Time after cooking is completed and to program the oven as
Minute Timer and/or to program Delay Start.
To Use as a Kitchen Timer:
Example: To count 5 minutes
T. * Press Timer Pad.
* Set desired amount of time
using the number pads. (up
to 99 minutes and 99
seconds)
* Press.
» Time will count down
without oven operating.
To Set Stand Time:
Example: To stand for 5 minutes after cooking
(3 mins. at MEDIUM Power)
* Set the desired cooking
program (see page 10
"Power & Time Setting").
+ Set desired amount of
Stand Time using the
number pads. (up to 99
minutes and 99 seconds)
* Press.
» Cooking will start. After
cooking, stand time will
count down without oven
operating.
To Set Delay Start:
Example: To delay the start of cooking 5
minutes before setting the cooking
program of MED. for 3 minutes.
« Set desired amount of
delayed time using the
number pads. (up to 99
minutes and 99 seconds)
« Set the desired cooking
program (see page 10
"Power & Time Setting").
LEVEL
Med = 4 times
Y
Ls] [o] Lo]
3:00
* Press.
»Delayed time will count
down.
Then cooking will start.
NOTES:
1. If oven door is opened during the Stand Time or
Kitchen Timer, the time on the screen will continue to
count down.
2. Delay Start cannot be programmed before any
Auto Control Function.
This is to prevent the starting temperature of the
food from rising before defrosting or cooking
begins. A change in the starting temperature
could cause inaccurate cooking results.
-11-