Periodic maintenance and adjustment
1. Screw
2. Disconnect the headlight coupler,
and then remove the headlight
bulb cover.
7
1. Headlight coupler
2. Headlight bulb cover
3. Remove the headlight bulb holder
by turning it counterclockwise,
and then remove the burnt-out
bulb.
1. Headlight bulb holder
4. Place a new headlight bulb into
position, and then secure it with
the bulb holder.
5. Install the headlight bulb cover,
and then connect the coupler.
6. Install the headlight unit by install-
ing the screws.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
7-34
Replacing the brake/tail light
bulb
1. Remove the brake/tail light lens by
removing the screws.
1. Screw
2. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
EAU70550