Programming The Washing Time - Beko BDIN16N30S User Manual

SelfDry Function (K)
(Depends on the Model)
"SelfDry" feature of your machine increases
drying efficiency of your machine and saves
energy.
When you activate this function, the door
of your machine opens automatically at the
end of the washing program.
Function can extend the duration of the
selected program up to 35 minutes.
Auto Door Open feature opens the
door of the machine at the end of the
washing circle, thanks to the "door
opening shafts". This process takes
approximately 2 minutes. If the power
fails while the shafts are moving out,
do not force to close the door. When
the power is back, the process shall be
completed, and the shafts shall return
to their initial position.
Changing SelfDry Settings
1. Press the Delay and Start/Pause/
Cancel key simultaneously for 3
seconds after turning on your machine.
2. Press the Delay key until 3 hours delay
indicator is illuminated in the menu.
Using the function keys, set the SelfDry
function on or off. Function is off when
the first cycle indicator is illuminated,
and it is turned on when the second
cycle indicator is illuminated.
3. Turn off your machine with the On/Off
key to save the setting.
28/EN
Changing Warning Sound Volume
1. After turning on your machine, press
and hold the Time Delay and Start /
Pause / Cancel keys respectively.
2. Using the Time Delay key, turn on 9
and 6 LEDs.
3. Adjust the volume with the function
keys.
If the 1st programme indicator is on, the
volume is off
If the 2nd programme indicator is on, the
volume is at medium level
If the 3rd programme indicator is on, the
volume is at high level.
4. Turn off the machine with the On/Off
key to save the changes.

Programming the washing time

Time Delay
If an economical electricity tariff is applied
in your region, you can use the time
delay function to wash your dishes during
appropriate hours.
You can delay the start of the selected
programme up to 9 hours.
Hold the delayed start key pressed for
1 second more than the other keys.
1. Press the time delay key after selecting
the washing programme and other
auxiliary functions.
2. Once you press the Time Delay key "3
hours" Time Delay indicator will start
flashing.
3. Set the desired time by pressing the
Time Delay key. Each press on the key
will increase up to 9 hours with 3-hour
increments.
4. Close the door of your machine after
setting the Time Delay. Once the delay
time is over, the selected programme
will start automatically.