Beko BDIN16N30S User Manual page 27

To add additional functions to the
program:
1. Select the desired washing program.
2. When you select an additional function,
the indicator of the additional function
lights up. When you press the function
button again, the indicator turns off and
the selection is cancelled.
If your machine has sub-menu
functions depending on the model,
see the instructions in the additional
functions section for their use.
Tablet Detergent Function (T)
(depends on the model)
Depending on the mains water hardness,
it provides better drying performance
in washings made with multi-purpose
detergents which are named 2in1, 3in1,
4in1, 5in1, all-in-one etc.
When you select the tablet detergent
function, the Tablet Detergent indicator
lights up.
Depending on the control system of
your machine, if the Tablet Detergent
function is not available in the program
you selected, its indicator turns
off. You can find the information in
which programs the tablet detergent
function can be used in the "Program
information and average consumption
values table".
In some models, depending on the
control system of your machine, even
though the Tablet Detergent function
is not available in the program you
have selected, its indicator may remain
lit as long as the Tablet detergent
function is not turned off. You can find
the information in which programs this
function can be used in the "Program
information and average consumption
values table".
If you used the Tablet Detergent
feature in the last washing program
you used, the Tablet Detergent function
will remain active in the next washing
program you selected.
The tablet detergent function can
increase the program time up to 35
minutes.
Half Load function (Y)
(depends on the model)
It is used when you want to run your
machine without fully fill it.
1. Place your dishes in your machine as
you wish.
2. Turn on the machine from the On / Off
button.
3. After selecting the desired program,
press the Half Load button.
When the function is active, the Half Load
indicator lights up in the function selected
indicator and on the screen.
When the function is active, the selection
indicator on the selected function key lights
up.
4. Run the program by closing the door of
the machine.
Thanks to the Half Load function, you
save water and energy while using
the lower and upper baskets of your
machine at the same time.
27/EN