Specifications - Makita DK18113X1 Instruction Manual

ENGLISH (Original instructions)
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Switch trigger

SPECIFICATIONS

Capacities
-1
No load speed (min
Overall length
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for drilling and screw driving in wood,
metal and plastic.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB(A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
Explanation of general view
3-1. Reversing switch lever
4-1. Speed change lever
5-1. Adjusting ring
5-2. Graduation
Model
Steel
Wood
Wood screw
Machine screw
High (2)
)
Low (1)
North/South America
Other countries
Net weight
Rated voltage
) : 70 dB(A) or less
pA
value (tri-axial vector
2
) : 2.5 m/s or less
h,D
2
DF347D
10 mm
25 mm
5.1 x 63 mm
198 mm
1.4 kg
D.C. 14.4 V
ENE034-1
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
ENG905-1
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
EC Declaration of Conformity
We Makita
manufacturer declare that the following Makita
ENG900-1
machine(s):
Designation of Machine:
sum)
Cordless Driver Drill
Model No./ Type: DF347D,DF457D
are of series production and
Conforms to the following European Directives:
2006/42/EC
ENG901-1
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd.
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
3
5-3. Arrow
6-1. Sleeve
DF457D
6 mm x 75 mm
6 mm
0 - 1,400
0 - 400
228 mm
221 mm
D.C. 18 V
Corporation as the
13 mm
36 mm
1.7 kg
ENH101-15
responsible