Table of Contents
Advertisement
Changing
the menu
settings
POWER
Icon/item
Mode
Meaning
switch
[]
RE(; MODE
• SP
To record in SP (Standard
Play) mode
VTR
LP
To increase the recording
time to twice the SP
CAMERA
mode
ORC TO SET
To automatically
adjust the recording
condition
CAMERA
to get the best possible
recording.
Press
START/STOP
to start adjustment.
Your
camcorder
takes about 10 seconds
to check the
tape condition
and then returns
to the standby
mode.
ORC stands
for "Optimizing
the Recording
Condition".
_REMAIN
• AUTO
To display
the remaining
tape bar:
VTR/PLAYER
• for about 8 seconds after your camcorder
is
CAMERA
turned on and calculates
the remaining
amount
of tape
• for about 8 seconds after a cassette is inserted
and your camcorder
calculates
the remaining
amount
of tape
• for about 8 seconds after _
is pressed
in
VTR (CCD-TRV87)
or PLAYER
(CCD-TRV17/TRV37/TRV57/TRV67)
mode
• for about 8 seconds after DISPLAY is pressed
to display
the screen indicators
• for the period
of tape rewinding,
forwarding
or picture search in the VTR (CCD-TRV87)
or
PLAYER (CCD-TRV17/TRV37/TRV57/
TRV67) mode
ON
To always display the remaining
tape bar
Notes
on the LP mode
• When
you record
a tape in the LP mode
on your camcorder,
we recommend
playing
the tape on your camcorder.
When
you play back the tape on other camcorders
or
VCRs, noise may occur in pictures
or sound.
• Noise may occur also when
you play on your camcorder
tapes recorded
in the LP
mode on other camcorders
or VCRs.
• When
you record
a tape in the LP mode
on your camcorder,
recording
is carried
out in
the standard
8 mm system.
(CCD-TRV67/TRV87
only)
Notes
on ORC setting
• Each time you eject the cassette,
the ORC setting
will be canceled.
If necessary,
reset
the setting.
• You cannot
use this setting
on a tape with the red mark
on the cassette
exposed.
(i. e. the tape is write-protected)
• When
you set ORC TO SET, a non-recorded
section
of about
0.1 seconds
appears
on
the tape. However,
note that this non-recorded
section
disappears
from the tape when
you continue
recording
from this section.
• To check if you have already
set the ORC setting,
select ORC TO SET in the menu
settings.
"ORC ON" is displayed
if ORC TO SET is already
set.
58
Advertisement
Table of Contents
