Table of Contents
Advertisement
SEI
FONE ELS
SPECIFICATIONS
Motor and Turntable
Drive System:
Motor:
Turntable Platter:
Inertial Mass:
Speeds:
Speeds Control Range:
Wow and Flutter:
Signal-to-Noise Ratio:
Tonearm
Type:
Effective Arm Length:
Overhang:
Tracking Error:
Usable Cartridge Weight:
Other Features
Direct-drive turntable
DC servomotor (8 pole 24 slot)
330mm diam. aluminum alloy die-cast
200kg-cm? (including platter mat)
33-1/3 and 45rpm
22%
Less than 0.03% (WRMS)
More than 73dB (DIN-B)
(with Pioneer cartridge model PC-135)
Static-balance type, S-shaped pipe arm
221mm
155mm
0.525 deg./in, 0.21 deg./cm
4g (min.) to 10g (max.)
Warren motor for automatic functions (auto lead-in, auto return,
auto cut, auto repeat), Anti:
Cueing device, Strobe light,
-skating force control, Lateral balancer,
Detachable dust cover,
Fine speed adjusters, Insulator feet, Plug-in type headshell
Miscellaneous
Power Requirements:
Power Consumption:
Dimensions:
Weight;
Accessories
EP adaptor
...
Screwdriver . .
Cartridge mounting screws .
Cartridge mounting nuts
.
Cartridge mounting washers
Operating instructions ... .
AC 110V/120V/220V/240V~
(switchable), 50/60Hz
8w
460(W) x 395(D) x 171(H)mm
18-1/8(W) x 15-9/16(D) x 6-3/4(H) in
8.5kg/18 Ib 1202
SNNA-=
Accessory Cartridge Specifications
Type:
Stylus:
Output Voltage:
Tracking Force:
Frequency Response:
NOTES:
© Specifications and design
Moving magnet type
0.5mil diamond (PN-400)
2.5mV (1kHz, 50mm/s Peak Velocity, LAT)
1.0g to 1.8g (proper 1.5g)
10 to 40,000Hz
subject to possible modification with-
out notice, due to improvements.
@ The PL-520 (with the accessory cartridge) does not come with
cartridge mounting screws, nuts or washers.
STYLUS REPLACEMENT
The
life
expectancy
of the
accessory
cartridge stylus tip is 800
— 1000 hours.
For the sake of maximum sound quality
reproduction, we recommend replacement
within
the minimum
time
limit. The
stylus tip is replaced
by grasping the
stylus holder and pulling it away from the
body of the cartridge. The new stylus tip
is then inserted by pushing it into the
receptacle. The correct replacement tip is
the
PN-400.
This
may
obtained
from
your
Pioneer
dealer.
Pioneer
cannot
guarantee
performance
or reliability
if
another type of stylus is employed.
PN-400
Fig. 15
PIONEER
ELECTRONIC
CORPORATION
34-1. Meguro 1-Chome. Meguro-ku, Tokyo 153, Jagan
U.S. PIONEER ELECTRONICS
CORPORATION
&5 Oxford Drive, Moonachie, New Jersey 07074. U.S.A.
RIONEER ELECTRONIC (EUROPE) N.V. Luithagen-Haven 9, 2030 Antwerp, Belgium
PIONEER ELECTRONICS
AUSTRALIA
PTY. LTD. 178-184 Boundary Road, Braeside. Victoria 3195, Australia
<77KO3FOBO2>
<PRB-084-0)
Printed in Japan
Advertisement
Table of Contents
