Canon NP-1215 Service Manual page 62

C. MAIN MOTOR ASSEMBLY
1. Removing the Main Motor
1) Remove the rear cover, then remove the
screw and remove the capacitor and
capacitor cover.
@ Screw @ Capacitor cover
Figure 4-18 |
2) Disconnect-all connectors from the DC
controller PCB, then remove the DC
controller PCB.
3) Disconnect connector J105 from. the
AC driver PCB. ;
@ AC driver PCB ©@ Connector (J105)
Figure 4-19
4-8 COPYRIGHT © 1988 CANON INC.
4) Unscrew the four screws, then lift the
main motor and remove it from the
front.
@ Mounting screws @) Main motor
Figure 4-20
CANON KP-1215 REV. MAR. 1988 PRINTED IN JAPAN (IMPRIME AU JAPON)