Advertisement
CONNECTION
DIAGRAM
Be sure Power on/off switch is off before making connections.
Connect the camera, power supply, and video tape recorder as:shown below.
Camera, Power Supply and VTR without 10-pin connector
Remote Control Jack
Line (Audio) Output Jack (RCA)
Video Output Connector (UHF)
OPERATION
Except forthe Power on/off switch, this unit has no other operating controls.
After above
connections are made, place the Power on/off switch to the ON position.
Note:
1. Some VTR models have a selector switch that must be set from the tuner position
to either LINE or CAMERA.
Be sure to read the Operating Instructions for your:
Video Tape Recorder.
2. When
this switch
is used, the playback
picture will not apear on the camera's
viewfinder.
It must be viewed on the television set.
SPECIFICATIONS
Audio Output:
Output Impedance 1K ohm
Level —20dB- Audio Output
Power Source:
120V AC60Hz
Power Consumption:
19W
Dimensions:
-80mm(W) x 149mm(L) x 75mm{H)
Weight:
Approx. 1.2kg
For use with Panasonic
PK-957, PK—903, PK—973, PK—557 PK—-503
Solon Car riele ote:
PK—503M, PK—956, PK—-802, PK—756, PK—
752,
PK--972,
PK—805,
PK-—801,
PK-800,
PK—771, PK—755, PK—751, PK—750, PK—700,
PK—700A, PK—530.
Advertisement
