Sony SLV-AV100U Operating Instructions Manual page 93

Attaching a UHF/VHF band mixer
When using both 75-ohm coaxial cable and 300-ohm twin lead cable for
VHF/UHF antenna, use the EAC-66 UHF/VHF band separator/mixer (not
supplied) to connect the antenna to the VCR.
300-ohm twin
lead cable
EAC-66
UHF/VHF
band
separator/
mixer (not
supplied)
75-ohm coaxial A:
cable
Loosen the screws on the mixer.
Wind the twin leads around the screws on the mixer.
Retighten the screws.
am WN = Connect the 75-ohm coaxial cable to the mixer.
Additional Information 93