Onkyo DX-C201 Service Manual page 7

DX-C201
DX-C101
Ref. No. . Ref. No. | Removal of the power source P.C.B.,
Removal of the disc tray power transformer and power switch rod
Procedure Procedure
1-2 +3 7
Screwdriver
Power Switch Rod
1. Release the claw and remove the tray holder in the
direction of the arrow @).
2. Remove the tray holder in the direction of the arrow ©.
Procedure
1-2 +3 +8
2. Remove the 3 screws ( @~ @).
3. Remove the 1 connector (CN 1).
Power Switch Rod
Unsolder the
terminals
Power Transformer
4. Unsolder the terminals of the power transformer.
Bracket
CCEEH|oceo tf
Operation Panel
1. Remove the 2 screws. (@~ @). 2. Remove the bracket from the rib.
3. Remove the operation panel in the direction of the
arrow.