Table of Contents
Advertisement
The auto tuner setup function
is described
on page 20 as the interactive plug-in menu.
)f you
need to run the auto tuner setup again, follow the steps below.
AV
Press the MENU button
To AUTO TUNER SETUP
To operate
To choose CABLE or AIR
Press the OK button to start
Programming
will take approximately
1 to 2 minutes.
The auto tuner is finished when the
message PRO6RAMMIN6
OVERt appears onscreen.
Press the Menu button when finished
Channel summary allows you to customize
the line-up of channels received by your TV.
You can add or delete channels from the line-up or prevent any unauthorized
viewers from
watching
any or all 181 channels.
Press the MENU button
AV
TO CHANNEL SUMMARY
4111_
To operate
The Channel summary screen will now be displayed
with
the channels set to scan marked with an "J". You can
delete channels from the scan by removing the "7". If any
channels were missed during auto tuner setup and you wish
to add them, you may by placing an ",/" next to the channel
number.
AV 411_ TO the SCAN column
Press the OK button to include or delete from scan
Press the MENU button when finished
You can block access to a channel by activating
the channel lock.
Press the MENU button
AV
TO CHANNEL SUMMARY
4111_
TO operate
AV_II_
Tothe Lock Column (1_1)
Press the ZERObutton to lock
unlock that channel
or
Press the MENU button when finished
m
Advertisement
Table of Contents
