Table of Contents
Advertisement
The moisture has condensed inside the recorder.
Keep the power on and wait until the indicator goes off to indicate
that the moisture has evaporated.
@ Do not try to insert a cassette while the AUTO OFF indicator is lit.
Otherwise the protection circuit may be activated and the recorder
will not operate even if the indicator goes off. In such a case, turn
the power off, then turn it on again.
lf the AUTO OFF indicator lights and the
function buttons do not function
Moisture condensation
If the tape suddenly stops and the function
buttons do not function
>
lf the STAND BY indicator remains lit and
—>
the recorder does not operate even though
the lamp of the function button pressed is
lit
Eject the cassette, and take up the leader tape manually (see page
5). Reinsert the cassette and operate the recorder again.
If the recorder does not function, turn the recorder off and contact
your nearest Sony service facility.
1.
Check that the ac power cord is firmly connected to the AC IN connector and to a working ac oust:
2.
Check that the POWER switch is set to ON.
3.
Check the connections:
for recording and playback, see pages 14 and 15; for editing, see page 22.
Problem
:
Corrective action
@ls the cassette correctly inserted? (See page 5.)
® Check whether another cassette has already been inserted.
®@ Check that the REC lamp is lit.
@ Adjust the video and audio recording level. (See page 16.)
@ Prepare the program to be recorded. (See page 16.)
A cassette cannot be inserted.
@ Check that the appropriate edit mode indicator is lit.
if the different indicator is lit, press the corresponding button to turn the in-
dicator off, then press the appropriate button.
The desired edit mode cannot
be set.
The playback picture
Snow or streaks appears.
@ Adjust the TRACKING
control. (See page 24.)
@Clean the video head. (See page 25.)
Sound cannot be heard from a
28
Advertisement
Table of Contents
