Dial Pointer Setting - Sony ICF-SW15 Service Manual

ICF-SW15
Parts Identification
(1] Telescopic antenna
[2] VOLUME control
[3] TONE (MUSIC/NEWS) selector
MUSIC: for listening to the music
NEWS: for listening to news, etc.
[4] ® (earphone) jack
[5] DC IN 4.5 V (external power input) jack
[6] Speaker
Battery compartment (bottom)
SW BAND SELECTOR
(9] OFF (power off) button |
POWER ON/BAND FM/MW/SW buttons and indicators
When you press one of the buttons, the unit is turned on and the
indicator lights up.
[11] Hand strap
[12] HOLD switch
Slide it in the direction of the arrow (HOLD):
When listening, to avoid accidental change of the functions.
When not using, to prevent accidental pressing to turn the power on.
[13] Dial scales
TUNING control
[15] TUNE (tuning) indicator
The indicator lights up when a signal is received.
Stand (rear)
[|
> [> [2] [ry
6\/7]/8][9] [10]
How to use the stand
SECTION 1
DIAL POINTER SETTING
Note: Follow the assembly procedure in the nemerical order given.
@ dial pointer
@ Clip the spring of a gear (B) by
tweezer and match the teeth of a
gear (B) and a gear (A).
© Tighten the screw M1.7X3
gear (B)
___-—-@ Mount the variable capacitor shaft
into the hole of a gear (A).
Cc) y r =e
@ Turn the variable capacitor fully
@ First, turn the tuning shaft fully in the arrow @ diretcion. Move
only the dial pointer in the arrow @ direction and s¢ it on the
scratched lines on the dial scale plate. Apply suitibsle locking
compound to @ portion.