Operations And General Maintenance; Activate Backup Battery - Victor VCT12807 Operating Manual

BEFORE TURNING ON -
the ribbon and check the rating label on the bottom to see if the rated voltage corresponds
to the local voltage before plugging in the AC cord.
Note:
Ribbon cushion is located under printer cover.

ACTIVATE BACKUP BATTERY

Before start using the calculator, please remove the insulation paper below the backup
battery.
1. Turn the AC power switch OFF and remove the battery compartment cover
located on the bottom case.
2. Remove the insulation paper located below the backup battery.
3. PRESS THE RESET SWITCH.
4. Replace the battery compartment cover.
5. Turn ON the AC power switch.
6. Program the date and time according to the instruction manual.
1
Bottom Case
GENERAL MAINTENANCE
1. Do not place the machine in hot, dusty or damp locations.
2. To clean the housing use a silicon-treated cloth. Do not use water or detergents.
3. Do not place anything on the housing, particularly on the head of the printer
mechanism:
4. Turn off the power switch before removing the plug from AC wall outlet.
5. Turn the power switch off while not in use.
Please remove the ribbon-shipping cushion placed on
Backup Battery
CR2025
3
Insulation
Paper
2
3
Reset Button
REMOVE BEFORE USING THE MACHINE
Depress Reset in Battery Compartment
Program Date & Time – See Operator Manual