General Maintenance; How To Feed The Paper - Victor 1280-7 User Manual

Before Beginning Calculation
1. Plug in AC power
2. Be sure the paper roll and ribbon have been installed properly.
3. Turn power switch on and make sure the display lights. A "C" will
automatically be printed on the paper tape.
4. Set decimal point selector switch to the desired position.
.

General Maintenance

1. Do not place the calculator in hot, dusty, or damp locations.
2. To clean the housing, use a moist towel.
3. Do not place any items on the housing, particularly on the head of the printer
mechanism.
4. Turn off the power before removing the plug from AC wall outlet.
5. Turn the power off while not in use.
How to Feed the Paper Tape
1. Plug in the calculator and turn it on.
2. Cut or tear evenly the end of the paper roll to get a straight edge.
3. Place the paper holder into position. (Fig. 3)
4. Install the paper roll on the paper holder.
5. Insert the paper end into the printer slot. (Fig. 4)
6. Press the Paper Feed (↑) key to feed the paper to an adequate length.
(Fig. 3) (Fig. 4)