Table of Contents
Advertisement
General problems or technical faults
Issue
The hob cannot be
switched on.
A smell and vapours are
given off when the new
appliance is being used.
An operating noise can
be heard after the
appliance has been
switched off.
Cause and remedy
There is no power to the hob.
Check whether the fuse has tripped. Contact a
qualified electrician or your Miele dealer (for the
minimum fuse rating, see data plate).
There may be a technical fault.
Disconnect the hob from the electricity supply for
approx. 1 minute. To do this:
– trip the relevant fuse or screw the fuse out
completely, or
– switch off the residual current protection device
If the appliance will still not turn on after resetting
the trip switch in the fuse box or the residual
current current device, contact your Miele dealer.
The metal components have a protective coating.
When the appliance is used for the first time, this
causes a smell and possibly also vapour. The
material from which the induction coils are made also
gives off a smell in the first few hours of operation.
With each subsequent use, the odour is reduced until
it disappears completely. The smell and any vapours
given off do not indicate a faulty connection or
appliance and they are not hazardous to health.
The cooling fan runs until the hob has cooled down
and then switches off automatically.
Problem solving guide
55
Advertisement
Table of Contents
