Sharp LC-70EQ10U Service Manual page 55

3. Removeing of connectors and Decoration Cover (Rear) and Front Cover Ass'y.
1. Disconnect the following connectors from MAIN Unit. (PD, SP2, LW, RA, UB, BT).
2. Disconnect the following connectors from POWER/DRIVE Unit. (PD, L1, L2).
3. Disconnect the following connectors from LCD CONTROL Unit. (PL, LW).
4. Remove the 8 lock screws (1) and the 3 Hooks and detach the Front Cover Ass'y (2).
5. Remove the 6 lock screws (3) and detach the Decoration Cover (Rear) (4) from the Front Cover Ass'y (2).
6. Disconnect the following connector from WiFi+BT Unit. (WB)
7. Detach the WiFi+BT Unit (5) from the Front Cover Ass'y (2).
8. Disconnect the following connector from RC/ICON Unit. (RA).
9. Detach the RC/ICON Unit (6) from the Front Cover Ass'y (2).
10.Detach the Speaker Unit (Woofer) (7).
11.Remove the 2 look screws (8), the 8 look screws (9), the 2 look screws (10) and the 8 look screws (11) and detach the BL Support Angle (Bottom)
(12).
L1
Front Cover Ass'y
L2
RC/ICON UNIT
RA
LC-60/70EQ10U,SQ10U/15U/17U,TQ15U,UQ17U
Speaker Unit (Woofer)
LW
RA
SD
PL PD
UB PD
BT PD
UB
WiFi+BT UNIT
4 – 34
SP2 PD
Front Cover Ass'y
Decoration
Cover (Rear)