Samsung WA86C User Manual page 59

You can remotely boot the device by sending a boot command through a wired
network while connecting a network cable.
6.6.3 HDMI CEC
All device connected by HDMI can be controlled through the remote controller of
the display or connected device, if HDMI-CEC is supported and enabled.
6.6.4 USB Clone
Quick setting synchronization is possible by exporting default settings through USB
clones or importing settings from other devices. You can synchronize settings
values for system settings or touch menus.
6.6.5 Default Startup Item
If the default startup item is specified, the corresponding App / Webpage / Document
can be automatically displayed after startup.
 The supporting Apps are [Browser], [Note], and [Palette].
6.6.6 Kiosk Mode
Set the default boot display item to a web page or photo. After the system starts up,
the system displays specified app or content only, so other apps or contents cannot
be operated. If Kiosk mode is started, the specified content only will run and no way
to exit or not to be terminated without system off.
 The kiosk mode can be terminated by sequentially pressing 'Menu'→'Up'
→'Down'→'Left'→'Right' of the remote controller.
 When the kiosk mode is enabled, the following window message pops up to
show the button combinations to exit the mode.
- 59 -