Operating The Mower Blade-Control Switch (Pto) - Toro TimeCutter 5000 Manual

•
Use extra care while operating with accessories or
attachments, such as grass-collection systems.
These can change the stability of the machine
and cause a loss of control. Follow directions for
counterweights.
•
If possible, keep the deck lowered to the ground
while operating on slopes. Raising the deck while
operating on slopes can cause the machine to
become unstable.
Figure 15
1. Safe Zone—use the
machine here on slopes
less than 15° or flat areas.
2. Danger Zone—use a
walk-behind mower and/or
a hand trimmer on slopes
greater than 15° and near
drop-offs or water.
3. Water
Towing Safety
•
Do not attach towed equipment except at the hitch
point.
•
Do not use the machine as a towing vehicle unless
it has a hitch installed.
•
Do not exceed the weight limits for towed
equipment and towing on slopes. The towed
weight must not exceed the weight of the machine
and operator.
•
Never allow children or others near the towed
equipment.
•
On slopes, the weight of the towed equipment may
cause loss of traction, increased risk of rollover,
and loss of control. Reduce the towed weight and
slow down.
•
The stopping distance may increase with the
weight of a towed load. Travel slowly and allow
extra distance to stop.
•
Make wide turns to keep the attachment clear of
the machine.
g229111
4. W = Width of the machine
5. Keep a safe distance
(twice the width of the
machine) between the
machine and any hazard.
Operating the Mower
Blade-Control Switch (PTO)
The blade-control switch (PTO) starts and stops the
mower blades and any powered attachments.
Engaging the Blade-Control
Switch (PTO)
Note:
Always engage the blades with the throttle in
the F position (Figure
AST
Disengaging the Blade-Control
Switch (PTO)
20
Figure 16
17).
Figure 17
Figure 18
g008945
g295538
g009174