Toro TimeCutter 5000 Manual page 11

Decal 144-5288 is for models without MyRide only.
Note:
This machine complies with the industry standard
stability test in the static lateral and longitudinal tests with the
maximum recommended slope indicated on the decal. Review the
instructions for operating the machine on slopes in the Operator's
Manual as well as the conditions in which you would operate the
machine to determine whether you can operate the machine in the
conditions on that day and at that site. Changes in the terrain can
result in a change in slope operation for the machine.
1. Warning—read the
Operator's Manual.
2. Cutting/dismemberment
hazard of the fingers or
hand—keep hands away
from moving parts; keep
all guards and shields in
place.
3. Thrown object
hazard—keep bystanders
away; pick up any debris;
keep the deflector in place.
144-5288
4. Runover hazard—do not
carry passengers; look
behind you when moving
in reverse.
5. Tipping hazard—when
loading onto a trailer, do
not use dual ramps; only
use a singular ramp wide
enough for the machine;
do not use a ramp with
a slope greater than 15°;
back up the ramp (in
reverse) and drive forward
off the ramp.
6. Tipping hazard—do not
use the machine near
drop-offs or on slopes
greater than 15°; only
operate across slopes less
than 15°.
decal144-5288
9