BMW M3 SEDAN Owner's Manual page 64

CONTROLS
switched off. Data can only be deleted while
the vehicle is stationary. The vehicle key must
be in the vehicle.
1. Apps menu
2. "Vehicle"
3. "System settings"
4. "Reset vehicle data"
5. "Reset vehicle data"
If the synchronization of settings has been en-
abled for a BMW ID in the vehicle, the personal
settings are kept in the BMW Cloud.
BMW ID/driver profiles
Principle
In ConnectedDrive countries, the BMW ID is
the personal login for all relevant offers for the
BMW brand. The BMW ID can be used in the
vehicle to store and activate personal vehicle
settings.
In non-ConnectedDrive countries, the personal
vehicle settings can be stored in driver profiles.
If a vehicle is used by several people, each per-
son can use their own BMW ID in the vehicle. If
a BMW ID is activated, the settings stored for it
are applied to the vehicle.
General information
The BMW ID must be registered once. A BMW
ID can be registered via the My BMW App, in
the ConnectedDrive Portal, or through an au-
thorized service center.
A driver profile is created in the vehicle.
Many of the settings that are stored for a BMW
ID in the vehicle can be synchronized with the
BMW Cloud. This makes these settings availa-
ble in any vehicle where the same BMW ID is
used to log in.
The vehicle can store three BMW IDs or three
driver profiles.
64
Personal settings
Online Edition for Part no. 01405A88034 - VI/23
With driver recognition, a BMW ID or driver
profile can be activated as soon as you unlock
your vehicle. For this, a vehicle key or digital
key must be linked with the BMW ID or driver
profile. After unlocking, you can change the
BMW ID or driver profile.
If no BMW ID or driver profile is activated when
the vehicle is unlocked, the vehicle loads the
guest profile.
Functional requirements
The vehicle must be stationary to create,
change, delete, or edit a BMW ID.
Logging in the vehicle with a BMW ID and
synchronization with the BMW Cloud are only
possible when the vehicle has cellular network
reception.
Welcome window
After unlocking the vehicle, a Welcome window
is shown on the control display. The type of
the welcome depends on the following prereq-
uisites:
▷ The vehicle does not have a stored BMW
ID or driver profile:
The welcome is neutral. An option to add a
BMW ID or create a driver profile is offered.
▷ The vehicle key or the digital key has not
been assigned to a BMW ID or a driver pro-
file:
The welcome is neutral. The stored BMW
IDs or the stored driver profiles are offered
for selection. Additionally, it is possible to
add a new BMW ID or create a new driver
profile.
▷ A BMW ID or driver profile has been as-
signed to the vehicle key or digital key:
The welcome is personalized, the stored
settings are activated. The BMW ID or the
driver profile can be changed.
As soon as the drive-ready state is turned on
or the control display is tapped outside of the
Welcome window, the welcome will be hidden.
OwnersManuals2.com