Operating Instructions For Each Part - Panasonic NI-GT150 Operating Instructions Manual

Parts identification
 Temperature selector
Dry ironing area

Operating instructions for each part

Be sure to disconnect the power plug from the power outlet
before filling the detachable water tank with water. Do not
take out the detachable water tank while you are using the
product.
◆ Water inlet
Hold the Water tank handle, take out the detachable water
tank, and add water through the water inlet. Make sure that
the "MAX" water level mark on the detachable water tank is
not exceeded. Then attach the detachable water tank onto the
power base correctly. Push it until a click sound is heard.
12
◆ Temperature selector
◆ Power button / Power indicator
Max steam
level position
Steam area
Select an appropriate temperature level according to
materials of clothes (See the section "Fabric and ironing
recommendations").
Press the power button. The product will start working. At this
time, the power indicator turns on in blue.
This product can switch between the enhanced steam level
and the eco steam level through the power button.
Enhanced steam level: suitable for heavy clothes that need
much steam.
Eco steam level: suitable for light clothes that need a little
steam.
◎ The product starts with the enhanced steam level by default,
and it can work as a steam iron after about 8 seconds.
◎ While the product is powered on, if you press and hold the
power button for about 4 seconds, a beep will be sounded,
the eco steam level indicator will turn on in green, and the
product will switch to the eco steam level.
◎ In the eco steam level, if you press and hold the power
button for about 4 seconds, the product will switch to the
enhanced steam level and the eco steam indicator will turn
off.
◎ While the product is powered on, if you press and hold the
power button for about 8 seconds, the power indicator will
start flashing, and three beeps will be sounded, indicating
that the product has switched to the automatic cleaning
mode. If you press and hold the power button again for
about 8 seconds, the product will switch to the enhanced
steam level.
• When you press and hold the power button, the eco steam