Advertisement
Assembly
1.
Place upper handle onto
base and push down. Attach
handle using 2 screws taped to
the handle.
4.
Wrap hose through hose
clip and connect hose wand
to foot hose at bottom of
vacuum.
Using Your Vacuum
1.
To plug in your vacuum,
gently pull out cord. Do not
pass mark on cord. Plug cord
into an outlet.
Emptying the Dirt Tank
1.
Press tank release button
and pull handle to lift dirt tank
away from vacuum.
2.
Insert wand base and turn
left to lock into place.
5.
Attach desired tool. Remove extension wand from the base of
machine and attach to end of hose. Extra tools can be stored on
machine when not in use.
2.
Press handle recline pedal
to lean vacuum back. Press
pedal a second time to recline
further. When finished, lean
all the way up to lock it into
upright position.
2.
Holding dirt tank over a trash bin, press release button on
back to open tank bottom and dump debris.
Snap bottom back into place when empty.
Required for Assembly
Phillips-head Screwdriver
3.
Insert end of hose into back
of vacuum and twist to lock
into place.
3.
Use knob to adjust for floor
types. If vacuum becomes
difficult to push, adjust
setting. When finished, unplug
vacuum. Hold cord and press
cord rewind button to slowly
retract.
BISSELL.com 3
Advertisement
