Advertisement
2. Enter the factory menu mode. (Factory mode)
From the factory menu of the design mode, to enter into factory mode place the cursor
on the contrast item and press 9735 to enter into factory mode menu
Factory mode menu :
Factory Hotkey : Factory mode switch
WARM-UP : Press the left and right keys to enter the aging mode.
ADC : Press the left and right keys to enter the ADC calibration page
White Balance : Press the left and right keys to enter the white balance adjustment page
SHOP Init : Press the left and right keys to perform NVM reset (enter factory
mode, not including white balance data and ADC data)
Preset Factory CH : Press the left and right keys to preset the factory channel
Power on Mode : Press the left and right keys to set power on mode
Advertisement
