Chevrolet Colorado 2024 Owner's Manual page 268

Uplevel Taillamp Assembly
1. Turn Signal
2. LED taillamp, see your dealer for
service
3. Stoplamp
4. Back-up lamp
1. Open the tailgate.
2. Remove the two rear lamp assembly
screws.
3. Pull the rear lamp assembly outboard, by
slightly rotating to clear the inner strip
of sheet metal, until the retainers
release.
Vehicle Care
4. Pull the rear lamp assembly straight back
to remove it from the vehicle. This may
require a forceful tug to pop the
fasteners loose. There will be a noise
when the retainers release.
5. Turn the bulb socket counterclockwise.
6. Pull the bulb straight out from the
socket.
7. Replace the bulb, then insert the bulb
socket into the rear lamp assembly and
turn clockwise.
267