Pioneer PD-Z84M Service Manual page 27

PD-2Z84mM, PO-2970M
Function in test mode Explanation
TRACK/ Carriage reverse Moves the pickup position toward the inner
MANUAL (inwards) diameter of the disc.
SEARCH REV When this key is pressed with the tracking
servo in a closed loop, the tracking servo
automatically goes into an open loop. Since the
motor does not automatically stop at the
mechanical end point in test mode, be careful
with this operation.
TRACK/ Carriage forward Moves the pickup position toward the outer
MANUAL (outwards) diameter of the disc.
SEARCH FWD When this key is pressed with the tracking
servo in a closed loop, the tracking servo
automatically goes into an open loop. Since the
motor does not automatically stop at the
mechanical end point in test mode, be careful
with this operation.
Initializes and the disc rotation stops.
The pickup and disc remain where they. are
when this key is pressed.
CD magazine eject Stores Disc 1 in the CD magazine, then ejects
the CD magazine. However, even though the
CD magazine is ejected, the pickup does not
return to the park position. Even if the CD
magazine is mounted again, the pickup remains
where it is.
Note: When inserting the magazine, disc 1 of the magazine is loaded automatically