1. Focus Offset Verification
@ Objective
Verify the DC offset for the focus error amp.
e@ Symptom when out of | The model does not focus in and the RF signal is dirty.
adjustment
@ Measurement instru-
| Connect the oscilloscope to
@ Player state
Test mode, stopped
ment connections
TP1, Pin 6 (FCS. ERR)
(just the Power switch on)
[Settings]
5 mV/division
e-Adiueiment iocavien
1 None
10 ms/division
DC mode
@ Disc
None needed
[Procedure]
30