Table of Contents
Advertisement
Grass Catcher
4. Place the grass catcher handle in position on top
—of the grass bag and frame as shown in figure 15.
Secure with four self-tapping screws.
TO ATTACH BAG TO MOWER
1. Hold the chute door on the catcher panel open as
-shown in figure 16.
2
. Slide the frame of the grass catcher down into the
channels on each side of the mower. The hooks
on the frame go over the panel on the discharge
chute. See figure 16.
To remove the grass catcher, lift the grass catcher
straight up.
TO CONVERT MOWER TO SIDE DISCHARGE
To convert your mower to a side discharge unit, pro¬
ceed as follows.
1
. Remove the rear discharge chute assembly by
removing two wing nuts. Lift up on the two bottom
corners of the discharge chute assembly, and slide
it off the deck.
2. Attach the side chute deflector by first placing it
over the rear bolt in the side of the deck. Then slide
the notch in the top of the deflector around the
shoulder bolt on top of the deck. Slide the notch
in the side of the deflector around the front bolt in
-the side of the deck. See figure 17.
3. Secure the front of the chute deflector to the bolt
on the side of the deck with one wing nut. See
figure 17. Secure the back of the chute deflector
—in the same manner. See figure 18.
11
Advertisement
Table of Contents
