Table of Contents
Advertisement
Portable Charging Cordset (EVSE)
Installation And Operating Instruc-
tions
1. Always insert the AC plug prongs of the Por-
table Charging Cordset (EVSE) into a 15 A, or
20 A, 120 VAC, 60 Hz, grounded wall outlet
first.
NOTE:
The Portable Charging Cordset (EVSE)
should be plugged into a dedicated circuit,
not a circuit shared with other devices draw-
ing electricity on the circuit.
WARNING!
INSTRUCTIONS PERTAINING TO A RISK OF
FIRE OR ELECTRIC SHOCK: Do not use the
Portable Charging Cordset (EVSE) on electrical
circuits with two-prong outlets; use with
improper outlets could result in electric shock,
fire, property damage, and death or serious
injury. Check with a qualified electrician if you
are in doubt as to whether the wall outlet is
properly grounded. Do not modify the plug
prongs provided with the Portable Charging
Corset (EVSE) – if it does not fit the outlet, you
must have a proper outlet installed by a quali-
fied electrician.
2. Check to see if the Portable Charging Cordset
(EVSE) is ready to charge by reviewing the
indicator lights.
Portable Charging Cordset (EVSE) Indicator
Lights
1 — Check Outlet Indicator Light
2 — Fault Indicator Light
3 — AC Power Indicator Light
3. If the Portable Charging Cordset (EVSE) is
ready to charge, ensure the vehicle is in PARK,
and then connect the charge connector to the
vehicle's charge inlet. You will hear a "click"
when the charge connector is inserted cor-
rectly and coupled with the vehicle's charge
inlet.
Inserting The Charge Connector Into The
Vehicle Charge Inlet
4. When the vehicle commences charging, the
green indicator light will turn on.
NOTE:
The vehicle should start charging automati-
cally.
EXTERIOR
47
Advertisement
Table of Contents
