Yamaha GRIZZLY YFM70GPAP 2023 Owner's Manual page 31

Clock, hour meter, voltage display and coolant
temperature display
1
2
1. Clock/Hour meter/Voltage display/Coolant temperature
display
2. "MODE" button
3. "SELECT" button
4. "RESET" button
The clock displays time in 12-hour format. The
hour meter shows the total time the engine has
been running. The voltage display shows the bat-
tery voltage. The coolant temperature display
shows the temperature of the coolant.
Push the "MODE" button to switch between the
clock "CLOCK", the hour meter "HOUR", the volt-
age display "VOLT", and the coolant temperature
display " " in the following order:
3 4
CLOCK → HOUR → VOLT →
To set the clock
1. Set the display to the clock.
2. Push both the "SELECT" button and "RE-
SET" button for 2 seconds. The hour digits
will start flashing.
3. Use the "RESET" button to set the hours.
4. Push the "SELECT" button, and the minute
digits will start flashing.
5. Use the "RESET" button to set the minutes.
6. Push the "SELECT" button, and then release
it to start the clock.
5-7
→ CLOCK
5