Laser Warming Labels - Onkyo DX-7310 Service Manual

DX-7310
This set employs a laser. Therefore, be sure to follow
carefully the instructions below when servicing.
WARNING!!
WHEN SERVICING, DO NOT APPROACH THE LASER
EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS
NECESSARY TO CONFIRM LASER BEAM EMMISION,
BE SURE TO OBSERVE FROM A DISTANCE OF MORE
THAN 30cm FROM THE SURFACE OF THE OBJECTIVE
LENS ON THE OPTICAL PICK-UP BLOCK.
LASER WARNING LABEL
These labels are located on the mechanism.
fi GER NVISIBLE LASER RADIATION
AND INTERLOCK FAILED OR
ae DIRECT EXPOSURE 10 BEAM.
esata AZARDOUS LASER AND
MROMAGNETIC IC RADIATION WHEN OPEN
SO INTERLOCK DEFEATED.
te aller NEMENT LASER
MERT AVEC L'ECLENCHEMENT DE SECURITE
"CLASS 1 LASER
PRODUCT"
Laser Diode Properties
Material: GaAlAs
Wavelength: 760~800nm
Emission Duration: continuous
Laser output: max. 0.5mW*
*This output is the value measured at a distance
about 1.8mm from the objective lens surface
on the Optical Pick-up Block.
VARO!
AVATTAESSA JA SUOJALUKITUS OHITETTAESSA
OLET ALTTINA NAKYMATTOMALLE
LASERSATEILYLLE. ALA KATSO SATEESEEN.
ADVARSEL
USYNLIG LASERSTRALING NAR DEKSEL
APNES OG SIKKERHEDSLAS BRYTES.
seein