Jumper Diagram - CrimeStopper CS-865RKE II Series Installation & Operating Instructions Manual

The jumper plugs inside the control module determine the unit's (+12V) or (-) Negative Parking & Dome Light
Relay outputs (White & Black/White wires). Use the jumper pins to change the Positive or Negative Polarity of
the outputs as required for your particular installation. (Default = Positive for Parking Light and Negative for
Dome Light) See diagram below.
CS-865RKE II MODULE
(-)NEG. PARKING LIGHT
JUMPER PIN DIAGRAM
TOP VIEW OF JUMPER PINS
Parking Light: P4
+12V PARKING LIGHT
(DEFAULT)
JUMPER
SIDE VIEW
Dome Light: P5
+12V DOME LIGHT
(-) NEG. DOME LIGHT
(DEFAULT)
7
JUMPER
PLUG
JUMPER
PINS