Antenna Diagram - CrimeStopper LC-1 Installation Instructions Manual

Low current
Table of Contents

Advertisement

25. ORANGE WIRE SELECTION: AUX 2 or OEM Arm - Default = OEM Arm
26. 1-WAY or 2-WAY SYSTEM:
This selects 1-Way or 2-Way antenna system. The 1-Way system uses AM and 2-Way system uses FM. You must
select this option using the brake pedal or remote control. If you accidentally change system from 1-Way to 2-Way (or
vise versa), you need to use the brake pedal to change option 26 back to correct antenna system.
27. 1 or 2 VEHICLE Usage: 1-Way Systems only
This option allows the remote control to operate 2 Vehicles. The Default = 1-Vehicle only.
Note: This Option does not apply to 2-Way Paging systems
28. SMART PHONE BAUD RATE: 9600 (MS-3), 115200
This is only used with a Smart Phone GPS modem. Must be set up to match modem speed.
29. OPTION RESET: (RESTORE TO DEFAULT)
This option restores all programmable options 1 thru 25 to factory default. The unit will flash the lights 2 times and all
values will be reset to factory original settings. Resetting the option table to default does not change Option 26, 27 or
28.

ANTENNA DIAGRAM

Antenna should be located at top of widow at least one inch away from metal surface.
ANTENNA
LOCATIONS
WINDSHIELD
20

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lc-3Lc-4Lc-7Lc-00

Table of Contents